OCEANBROAD EVA Foam Boat Flooring with 3M Adhesive Backing Marine Self-Adhesive Decking 96''x45.6''/36''/28.8''/16.8'', 48''x16.8'' Faux Teak Sheet for Jon Boats Swim Platform Helm Pad RV FloorClimatePartner certified

I’ve been pretty happy with this product. It’s easy to work with, just make sure you use a fresh blade on your box cutter or razor. It sticks extremely well, and looks great. I ended up having to purchase an additional roll, but still saved a lot of money doing it this way vs buying the precut stuff. I’ve only had it out on the water once since installing, but it held up great no peeling or damage. The color looks great, I’ve received many compliments on it. Highly recommend.

Nice product. I was skeptical buying the “cheaper” stuff, but this Ocean Broad uses the same 3M adhesive backing that the big names use. I bought and used a bevel foam board cutter from Logan Foam Works which worked out great and gives it that professional install look.

As with others reviews it does not stick to the surface as well as you would like it to. Primarily it will be an issue if the surface is not totally flat or at the ends of the material where it was rolled up. I did several rolls of different widths and lengths to make my job easier: decking on a boat. This product has the 3M adhesive label on the bottom with a waxy plastic like consistency. The adhesive on the bottom did not feel or appear to be dried out. The boat surface the EVA foam was attached to is metal. It was cleaned with soap and water and then a degreaser. The product was left unrolled and out in the heat inside a garage to acclimate. It was rolled as it was installed.The edges in a couple of places did start to lift after while.I used 3M "90" spray adhesive under those spots and put weight of all sorts on the product to force it to cure in the correct position. On the rest of the project I used the spray adhesive on the deck and bottom of the EVA foam with extra at the edges. An amusing display of weighted objects were employed, concrete blocks, wood block, tool boxes,a scrap of granite, a tackle box etc. After curing 24 hours I removed the weights, let sit another 24 hours then inspected. No bubble or lifted seams. Overall it was easy to cut and other than my amateur trimming around hatches it looks really good. One thing I did was make a template out of cardboard in areas that are beyond a straight or square and that helped a lot. Amazon boxes were used for that. Last note. Trying to draw lines on the backside of the foam was very difficult. Permanent marker, ink pen, pencil -nothing wanted to stick. Marker was the best but still faint. I used some type of straight edge whenever possible. A test trip was made. No issues seen when pulling the boat at highway speeds (65) or when pounding around on the water. I chose gray with black stripes. It feels good under your feet and is WAY cooler to the touch in 95 degree sun filled trips. I fish and soon realized that my color will show fish blood stains if you don't catch it right away. Just ask my fishing buddy. A camo color would not show that as much but I really didn't like what was offered. I hope this helps!Thickness:Thick enough to cushion feet and deaden noise.Size:different lengths and wide helped reduce waste of product and easier adaption to my floor plan,

I love this stuff. I’ve used it on 2 different occasions. Brown with white stripes. Has little bit of an orange tint to it. It’s killer stuff. Goes on super easy and really stays put. I use it over top of plywood casting decks. I don’t even treat the wood when I use this stuff it covers and keeps it nice and dry. If your going to use full sheets as I do make sure they’re laid nice and tight it has a slight shrinkage factor to it when you put 2 pieces together. Cuts super smooth with a sharp utility knife and once your done its got a great foot feel and your wife’s able to have a nice plushy bow spot to lay all day! Doesn’t get hot and you get a couple LONG seasons(im talking hundreds of hours in the hot nc summer sun) before it begins to fade it to a nice pastelish brown which still looks nice. The foam drys super fast and cleans easily. Im constantly getting black mud all over the foam and even after a couple days of hard fishing and no wash it comes clean everytime so Overall 10/10 no complaints I’ll buy it for the next build no shopping around needed!

I love this product! It was very easy to use. You just need to make sure the surface is clean and go for it!

I bought this product based on prior reviews and 3M adhesive factor. I used rosin paper to make the templates which was great because it was sturdy and easy to work with. Ilas far as cutting the flooring, be sure to have multiple utility knives and lots and lots of blades. I have no idea how many I went through however it was a lot. You can tell real quick when your blade needs replaced because it starts to snag and becomes difficult to cut. When cutting I had layers of cardboard underneath it and used a metal “L” to run the blade along. When installing, I pulled part of the backing off and got into place little by little before removing more of the backing. I did purchase a small roller to help apply pressure when installing, I would definitely recommend the roller. The end result is great, there are some imperfections in the installation however that is on me not the product. Looking forward to boating season starting to get enjoy the flowing instead of scrubbing the fiberglass floor nonstop. We have a 23’ Monterey Explorer and was able to do the inside of the boat and the back platform off of three full size sheets.

Same review this is order 2 of 2I spent about $700 on multiple boxes of the same product and after I stain my boat it was many different shades of gray. Product is 3mm base color used for grove color and a 3mm top layer for your main color so that becomes very apparent on all exposed edges.Lastly I am pulling it up in the flooring of my bay boat abuse all fish have a protective coating that is slimy and when landing fish it gets all over the flooring. Then when trying to use electric pressure washer on lowest setting to remove slime it left wand marks.I would say this products definitely not for a fishing boat nor is it for a a large area that requires more than one box because shades vary( not real obvious until installed