Queta6 Pieces LM2596s DC to DC Buck Converter Step Down Voltage Regulator Power Module 3.2-40V to 1.25-35V 3A High Efficiency DC Voltage Stabilizer Volt Transformer LM2596 DC-DC Buck Converter
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6

Queta6 Pieces LM2596s DC to DC Buck Converter Step Down Voltage Regulator Power Module 3.2-40V to 1.25-35V 3A High Efficiency DC Voltage Stabilizer Volt Transformer LM2596 DC-DC Buck Converter

4.5/5
Product ID: 313387839
Secure Transaction

Details

  • Brand
    Queta
  • Power Source
    Corded Battery
  • Product Dimensions
    0.55"D x x
  • Mounting Type
    PCB Mount
  • Current Rating
    3 Amps
⚡High Efficiency
📏Compact Design
đź”§Adjustable Voltage

Description

🔌 Power Up Your Projects with Precision!

  • COMPACT RELIABLE - Perfect for any DIY or professional application!
  • ROBUST CURRENT HANDLING - Supports up to 3A for your demanding projects!
  • UNLEASH POWER PRECISION - Transform your voltage with pinpoint accuracy!
  • USER FRIENDLY ADJUSTMENTS - Easily tweak output voltage with a simple knob!
  • EFFICIENCY MEETS VERSATILITY - Achieve up to 92% power conversion efficiency!

The Queta 6 Pieces LM2596s DC to DC Buck Converter is a high-efficiency voltage regulator that allows you to step down voltage from 3.2-40V to a continuously adjustable output of 1.25-35V, with a maximum output current of 3A. Designed for versatility and ease of use, it features a user-friendly potentiometer for voltage adjustments and boasts an impressive power conversion efficiency of up to 92%. Ideal for both DIY enthusiasts and professional applications, this module ensures stable performance and reliability.

Specifications

Current Rating3 Amps
Minimum Frequency50 Hz
Maximum Frequency65 KHz
Power SourceCorded Electric, Battery Powered

Reviews

4.5

All from verified purchases

R**H

These have worked well for my solar panels

I have a farm and on that farm I have some cameras. Actually quite a few. Many are in remote corners where I have no power so I utilize solar panels and LiFePO4 batteries. To keep the batteries charged I made camera poles that have a solar panel on top and the camera below for shade during the hot day.I use these devices to limit the output to the current to the correct voltage to charge the batteries during the day. So far they have worked perfectly. One thing I do that might give me better results is that I use a Conformal Coating on them to protect the electronics from moisture. This is an electronics spray used to coat electronics with a protective barrier for moist environments. I apply this to all of them before putting them outdoors to use.I keep these on hand for many other uses as well. Great little devices as ling as you do not exceed their rated capacity.

L**C

Great DC converter! ( Includes tips for new users )

These Queta DC-DC Buck converters work great! All six of the DC converter modules I received today performed exactly as expected. When the output is set to 3 volts, their output voltage only sagged about 10 mV when drawing a half amp, so they are regulating the output voltage pretty well under load.A WORD OF CAUTION to people who are not used to working with these buck converters - it may seem at first like they are not working correctly. When you first take them out of the package, they are typically set for maximum output, so the DC input and output voltages will probably be the same. So this means that initially you should NOT hook up the device you intend to power with this buck converter. You MUST first set the output of the module to the desired output voltage level, before you connect your device to it, or you could potentially FRY the unit that you were intending to power this converter with!When you power the module up, set the DC input voltage to the buck converter to somewhere between 7 to 14 volts DC. Using a jeweler's screwdriver, turn the small brass screw on the blue trimpot about 10 turns counter-clockwise. Assuming you are monitoring the module's output with a DC multimeter, after you surpass 9 to 10 turns of the trimpot you should start to see the output voltage drop. Now adjust the trimpot until you reach the intended DC output level. For a 3W "star type" high power LED, this could be about 3 volts. For an Arduino Uno, it might be around 6V > 7V.One other thing you might want to check before permanently wiring the module to your intended load device. With the converter module powered up, monitor the DC output voltage to make sure that when you connect your device to the output, make sure that the output voltage does not "sag" too much. If the voltage drops by more than say ~ 30 to 100 mV when you connect your load device, there might be a problem .... otherwise it is probably working just fine.

J**C

Good quality well regulated.

I am very happy with these buck converters. They run cool for my application. Running 24 volts input set for 12 volts output, drawing about an amp. Very stable well regulated output stay within a couple hundreds of a volt output. From no load to full load. Very impressive for such a compact product. Plenty of adjustment from a multi turn precision pot.

L**A

Does the job

Does the job

L**E

So far so good. Stable output voltage, but a little inefficient.

Used the first of these to power a Raspberry Pi 4 with LCD screen, which kept reporting low voltage using a 5v supply with plenty of capacity. Problem was that powering the RPi4 through the LCD screen resulted in a slight voltage drop, and the RPi4 was getting a touch under 5v (and is VERY picky).Used this to run it from my 3D printers 24v power-supply with an output voltage of 5.15v, which has been completely stable.I even tested running it from my bench power supply and changing the input voltage pretty widely, from 18-26v and the output was still pretty stable.I've since used another one of these for powering other devices when I need two voltages from my single output bench power supply. (e.g.: 12v and 5v or 5v & 3.3v etc), and has been reliable (over a short time thus far).My only gripe is that they do get a little toasty when running and are a little less efficient than should be possible with the LM2596 regulator (though at the in/out voltages I've been using even the datasheet rating isn't exactly great efficiency ... these were just a bit below that rating).An extra heatsink on the regulator chip may help, and depending on your application some forced airflow might be a good idea in any sort of enclosed space.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Vikram D.

The MOLLE sheath is of exceptional quality. Very happy with my purchase.

2 weeks ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
KD 7.51

Duties & taxes incl.

KUWAITstore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ravi S.

I loved the variety of products available. Will definitely shop again.

2 months ago

Meera L.

Smooth transaction and product arrived in perfect condition.

3 weeks ago

Queta6 Pieces Lm2596s Dc To Dc Buck Converter Step Down | Desertcart KUWAIT