MSC Bathroom Sink Tap with Single Lever Design - Premium Chrome Basin Taps Single Hole with Waterfall Round Mixers, Cloakroom Brass and Supply Hose, Elegant Faucet Set for Bathroom Taps SilvTap

Brilliant quality and a great price.

Despite the low price, the tap looks and feels like a quality product and proved a perfect replacement for the tatty one in our bathroom. There were no instructions included but I've fitted loads of these and the fittings were pretty standard and of an average quality, I was pleased that the tail hoses were a good length as I've had problems with them in the past. I've not fitted the waste, that will be used on another job later, but it looks pretty standard and pops up easily so I don't imagine there will be problems. Both items have a good chrome finish and time will tell how durable this is in my hard water locale. There are obviously better products out there, but little to rival this set for the price.

Beautiful and quality tap. It works perfectly and the water runs smooth. Really easy to install too. The pipes are quite long I think compared to other taps I've bought which made it super easy to plumb in.

Woks well

Installed the tap, waste for new basin, when connected it to the water had some leaks, thought the pipes, unfortunately it was the tap itself and had to go shop to buy replacement.

Very well made mixer tap that is easy to operate by simply lifting the tap to the pressure desired then rotating to left or right for hot or cold. It comes complete with fixings and looks very stylish when fitted.

I recently had to replace a mono block unit in my kitchen and know how much of a pain it can be.Luckily this kit seems to have everything you need, its primarily designed for bathrooms so the tap section does not rotate. Almost everything you need is included, the faucet, the hot and cold down pipes, the sink mounting kit (although i found the main fixing kit very thin), the retaining nut that holds the mono block to the sink is threaded.There does not seem to be a simple way to tightening this under your sink unless its supposed to be done finger tight.I didnt have any instructions so would need to wing it a bit. Previous fitments have required a long'ish threaded bolt to go into the mono block and then be secured through washers and using box spanners, but this doesnt include though and nor does it need them.Likewise the water pipes each have a O'ring seal which is screwed into the block (This is typically fine with finger tight due to the O'ring. The other end typically goes on to the house water pipes using the large nuts which include tightening lugs.Its a nice design and unusual fitment but it might be the way forward. the thinness of the threaded section under the sink does worry me a little.Over all its a nice set up though the single mixer tap feels nice and so much easier having a single lever.

This is a really well finished mixer tap and pop up basin drain kit from MSC. It has some weight to it so you know the info on the product page is true when it tells you that this is made from H59 brass.The chrome plating is really well polished with no dull areas to be seen and the lever operations is super smooth in all directions with no signs of tightness.This MSC mixer tap kit is supplied with two stainless steel braided feed hoses and a very nice press to pop up basin drain unit, basically you get everything you need to freshen up you old basin if that's what you're doing. This tap has a very modern look to it so it's going to suit modern design new fit basins also!Currently listed on Amazon for £24.99 this MSC mixer tap kit offers exceptional value for money, the price point should make this kit an attractive option for many situations. Home owners, property developers or landlords would find this quality and value appealing I'm sure.Overall this excellent mixer tap kit from MSC should definitely be considered when planning on making a purchase for this kind of tap.Five out of five stars!