Turtle Wax53838 Hybrid Solutions Graphene Acrylic Trim Restorer, Brings Dull Faded Exterior Plastic and Trim Back to Life Permanently, Protects from Future Damage, 10 oz. (Pack of 1)

This stuff really works good.I use it on the bumper on my Kia Soul.Wear gloves.It's hard to wash off fingers.

I absolutely cannot say enough about Turtle Wax ceramic wax. If you search on youtube for that product you will find some objective tests that will show beyond a doubt that the ceramic spray wax is amzing.So, when I saw this product I had to give it a try. I have an FJ Cruiser with a lot of black plastic. I have used other products and they are good but only last a month or so. I bought this and applied it as directed and honestly it lasted over one year in the worst winter conditions. Pretty much the same results as the ceramic spray wax. One bottle was more than enough to do my FJ as well as a friend's jeep. The only mistake I made was not taping off the paitned areas and not wearing gloves. The prodcut comes off the painted areas (if they are waxed!) with some effort. The hands - another story - lots of goop and pumice. IT was like a ceramic shell of black encasing my hands!The trim restorer is AMAZING - would recommend to anyone who has a lot of black trim to keep protected.

If you are looking for a quick wipe and walk away product, this is not it. If you are looking for a long lasting protectant that is going to make your trim look better than new, have the patience and willingness to go the extra mile in application, this is an outstanding product. I would rate it a 5 if only basing it on the end result of a patient application. I downgraded it to a 4 based upon what really needs to happen with the application. First off, clean and prep the trim. After a normal car wash, I went over all of my trim with a foaming tire cleaner (Hyper Foam Wheel Cleaner & Tire Prep) and a tire scrub brush. This was rinsed and followed by wiping the trim down with a Panel Prep (IPA type) spray. Once the panel prep had evaporated, the trim was ready for the application of the product. WEAR GLOVES. This is not a clear liquid, it's more of a creamy dye that will stain whatever it touches, hands, clothing, etc... Using a foam applicator or foam paint brush (I used both, the brush for tight areas where I needed more control). Apply a layer of the product... and yes, one layer may look streaky but don't sweat it. Use a circular motion with your foam applicator whenever possible. Apply to a section of the trim then immediately level with a microfiber cloth. Continue the first pass over all trim on the car using this process. All told, it took three total passes of all trim using this process to get uniform solid coverage but man, it looks great when finished. Better than new. It's been on my Jeep for two months thus far and, with routine maintenance washes, it looks like I applied it yesterday.

This restored my 40 year old faded black trim to a brand new rich black. I Definitely recommend this product!

Works great, turning faded black trim into a deep and dark black again!

What a surprise to find a very watery and messy liquid in this bottle. It was very difficult to apply because it kept dripping all over the place. They recommend wearing gloves, but don't supply any. I don't keep plastic gloves on hand. I had to use plastic bags on my hand. If some accidentally gets on the paint of the car, it will not wipe off. It smears. I did the applications as directed on the bottle and did two applications as recommended but it has a very streaky look. I accidentally got some on my arm and it left a rash. I would not recommend this watery product. The car looks better but not very good.

Cleans & polishes

Restored trim on my 2003 Honda CRV, but the tip came broken. Leaking everywhere. Wanted something new not broken.