KREGPRS1000 Corner Routing Guide Set - Corner Routing Guide - Use with Any Trim Router, Handheld Router, or Router Table - Router Woodworking Tool

excelente producto, no lo eh probado en la madera pero los materiales son de calidad me gusta el porta esquina que me permite organizarlos.

This is a very nice set, but then Kreg always is! Nice and easy to use. The best part is how easy it is to get 4 corners the exact same size.

The item itself is great, but similar to other reviews I've seen I bought this from a vendor called "pattern" and did not receive all 4 edge stop posts. I only received 2 which is usable but very difficult to use. I've contacted Kreg hoping they'll allow me to buy more or send me some.

Good guide for the edges cut by your router. Just follow the contour

I neve had Kreg tool that wasn't top quality. If you round over a lot of corners or other things this tool does, this is a great addition to your router accessory collection. Fast and simple operation. The recommended 1.5 inch router bit is a hair short for something as thick as a 2X4.

I originally ordered this product through Amazon. The listing was provided by a store called "Pattern.". The edge routing set arrived in a severely damaged box. I'm not sure whether to blame Amazon who handled the delivery portion or Pattern. who provided the product. I suspect a bit of both.In any case, my set was missing one of the edge guide pins. I contacted Kreg directly via email asking if they could send me a replacement pin. I received a response within minutes with an apology and a request for my address so they could ship a replacement immediately. I wasn't expecting another full edge guide set but that's what Kreg sent.I own a handful of other Kreg tools and, while often a bit on the expensive side, I've never been disappointed in any of their products so it's usually worth the price. This experience has just cemented my opinion of Kreg, though. They produce high quality tools and they stand by them!

The guides are so easy to use hand held or clamped to the material. The results are great!

I wish I would have tried this sooner when I first purchased it a year+ ago. I have other Kreg tools, so I (wrongly) assumed this would be of equal quality. My two main grips are: 1) the black inserts do not stay out very well. I noticed them moving (pulling outward) quite easily during normal operation 2) the “round” corners do not produce anywhere near a clean/flush corner. I thought it was user error at first, so tried numerous times with more than adequate pressure. However, no matter what I tried, there was always a noticeable transition from the round corner to the edge (both by eye and touch).After closer inspection I realized jig is poorly designed and does not achieve the proper depth of cut. The alignment pins prevent the edge of the board from lining up properly with the edge of the jig. I also triple checked all of my board corners to make sure they were truly square, since I know an out of square board will not produce expected results. I also confirmed with a machinist square that the alignment pegs do in fact impede the edges from lining up.This thing is now an overpriced paper weight that will probably eventually find its way into the trash, because I wouldn’t even want to donate it and plague someone else with horrible cuts. Unless you absolutely do not care about the quality of your cuts, avoid this product. Very unfortunate.