ONETWOFITMultifunctional Wall Mounted Pull Up Bar Power Tower Set Chin Up Station Home Gym Workout Strength Training Equipment Fitness Dip Stand Supports to 330 Lbs OT076

Es una maquina muy completo no la he podido usar todo lo que he querido pero si es muy compreto

Unfortunately I had to send back the first one, missing pull-up bar, but second one was all there. Solidly built, no issues with bolts or things lining up.I did have two problems that I did have to fix:(1) Being 5"8" and pushed against the pad for support, I couldn't reach the bars to grab onto (!).To remedy that, thankfully I had two longer bolts in my man-shed that I substituted for the two shorter bolts (that bolt the pad bar to the wall supports) and I used two shanks sleeves from the bolts leftover (I used carriage bolts to install directly into studs) and it brought the back pad forward almost two inches which made it the right length. Fixed!(2) Set-up as it's intended, The arm supports were to wide. So I drilled a new hole in the back support bar and aligned everything as normal. Fixed!Yes, I had to do some tweaking, but that's not the equipment's fault, everyone is different size and length so take this into consideration when buying. If you're over 6 feet tall the length from the back pad to the hand supports may be perfect. But the width, not sure if anyone is that wide, and wish the manufacturer made the pad bar with pre-drilled holes so you can adjust the width. Overall, solid and great price.

I mounted this to the concrete walls in my basement. I opted to use 1/4” wedge anchors from HD instead of the anchors that came with the product. They seemed stronger and required drilling smaller holes. Now, installing this took a lot of time and effort even with a hammer drill - if you’re installing in concrete, I would recommend using at least a standard hammer drill, one of the larger SDS units would be better, especially of you’re using the larger anchors this came with. And use good masonry bits - the cheap ones burnt up on me quickly. Anyway, this installation process would be the same for any other wall mounted unit - the assembly itself was quick and everything fit together well. After mounting everything and using it, I am very satisfied. I like how you can remove the dip bars if necessary.The product came with a missing piece - I could have returned the entire item and bought a new one but I had already partially assembled it. After contacting the seller they shipped the part out. Recommend checking that all parts are there before assembling.

A word of advice. It comes with 12mm expansion bolts. A 12mm masonry bit is called for but isnt something super common so I used a 1/2" bit instead thinking close enough. I was wrong and the holes I drilled were ever so slightly too big. I ended up redrilling new holes and using 5/16" Tapcon screws and now it is rock solid. I also like how the dip bars come off so it doesnt take up space when not in use.

Great piece of equipment. Easy to install, very sturdy and seems to be well constructed. I've used it for months now with no issues and it is still in perfect condition. Although all the mounting hardware was included to install on a concrete wall, the type of anchors that were provided are not what I prefer to use and opted to use Tapcons instead. If you plan to mount this on a framed wall, you MUST first mount a solid piece of 3/4" plywood (actual PLYwood, not chipboard/ waferboard, MDF and certainly not particle board). This is two fold: First, the spacing won't be compatible with a standard stud layout and Second, drywall is not dense enough to hold up under the weight and will crush or crumble in a very short time. Overall, especially for the price, this is a quality piece of equipment that functions well, holds up to moderate to heavy use and is not only well built but easy to assemble - HIGHLY recommended.